Designed for use with Aluminum Bulb-tite rivets, the tool greatly simplifies
rivet removal in repair operations. The specially ground jaws
cut rivet heads off cleanly without damage to the application material.
RV 57 Mandrel Trimmer
The RV57 Trimmer is designed for use with the Aluminum Shaveable
Head Bulb-tite rivets. The curved handles and flat ground blades
allow close trimming of the excess mandrel prior to finishing the
shaveable rivets using the Head Shaver tool.
HS 310 Rivet Head Shaver
The HS310 Shaver is used to shave and finish the heads on the
RV6607 series of Shaveable Aluminum Bulb-tite rivets. Installed rivets
are first trimmed of the excess mandrel protruding above the rivet
head using the RV57 trimmer. Next, the HS310 is mounted in a standard
3/8” drill and positioned over the rivet head. Actuating the shaver finishes the rivet head to provide the appearance of a brazier
head solid rivet. HS310-5B - for use with RV6607-5 series Bulb-tites
(5/32” diameter); HS310-6B - for use with RV6607-6 and -8 (3/16” and
1/4” diameters).
RV 24RE 
